Ensure Your Foundation’s Strength Before You Build

At AE Construction Ltd, we provide accurate and reliable Static Load Testing (SLT) services to evaluate the real-world performance of piles under load. This crucial step ensures your foundation can safely bear the structural loads it is designed for—before construction begins above ground.

What is Static Load Testing?

Static Load Testing is a method of applying controlled vertical force to a pile to determine its actual load-bearing capacity. The load is applied incrementally, and both settlement and recovery are precisely measured over time.

This test helps verify:

• Ultimate load capacity

• Service load performance

• Pile behavior under working and maximum loads

• Compliance with design specifications

When is it Required?

SLT is commonly required:

• Before full-scale foundation construction

• For new pile designs

• To confirm the bearing capacity in uncertain soil conditions

• On critical structures such as bridges, towers, or high-rise buildings

• As part of third-party QA/QC protocols

We conduct tests in accordance with international standards, including IS 2911, ASTM D1143, and BS 8004, depending on project requirements.

Our Testing Capabilities

With years of field experience and a focus on accuracy, our SLT services include:

• Compression Load Test – Tests how a pile behaves under downward structural load

• Tension (Uplift) Load Test – Evaluates pile performance under uplift forces (e.g. wind or buoyancy)

• Lateral Load Test – Checks resistance to horizontal forces (e.g. seismic, wind, or earth pressure)

We offer fully instrumented testing using:

• Dial gauges and displacement sensors

• Hydraulic jacks and loading frames

• Load cells and data logging systems

• Reaction piles or kentledge systems, depending on the test configuration

Our Testing Procedure

1. Site Assessment & Planning
   We evaluate the project site, pile type, and soil conditions to design a suitable test setup.

2. Test Setup Installation
   We install a loading frame, anchor system (kentledge or reaction piles), and all measurement instruments.

3. Load Application
   Load is applied in predefined increments, typically up to 150% or 200% of the working load. Settlement is recorded at each stage.

4. Observation & Data Recording
   We continuously monitor and log displacement data during loading, hold periods, and recovery.

5. Analysis & Reporting
   A full technical report is prepared with graphs, settlement curves, and load-settlement interpretation against allowable limits.

Why Static Load Testing Matters

• ✅ Confirms that pile installation meets design intent

• ✅ Identifies potential issues before construction continues

• ✅ Helps optimize pile design (length, number, spacing)

• ✅ Prevents overdesign and unnecessary costs

• ✅ Enhances confidence for clients, engineers, and regulatory bodies

Why Choose AE Construction Ltd for Load Testing?

• ✔ Experienced in testing various pile types and diameters

• ✔ Compliant with local and international standards

• ✔ State-of-the-art equipment and instrumentation

• ✔ End-to-end testing, analysis, and reporting

• ✔ Coordination with our in-house pile driving team for seamless service

Whether it’s a single pile or a full-scale test program, AE Construction Ltd ensures accurate and dependable results you can build on.